Sinds kort hebben we weer een 3D printer! De printer is gesponsord door Munisense B.V. en is beschikbaar voor gebruik vanaf 15 september.
De 3D printer is een Prusa MK4S 3D printer met een 250x210x220 mm build volume.
Tevens hebben we een heleboel PLA gesponsored gekregen van 3D Printing prototypes uit Leiden een heuse XXL 3D print service.
Specs
| Parameter | Specificatie |
|---|---|
| Build Volume | 250 x 210 x 220 mm | 9.84 x 8.3 x 8.6 in |
| Filament diameter | 1.75 mm |
| Layer height | 0.05-0.30 mm |
| Printer dimensions | 7 kg, 500×550×400 mm; 19.6×21.6×15.7 in (X×Y×Z) |
| Mainboard | Custom 32-bit xBuddy electronics with STM32 |
| Stepper Drivers | Trinamic 2130 |
| Stepper motors | Precise 0.9° X,Y stepper motors |
| Extruder | Nextruder, Direct Drive, E3D V6 compatible |
| Filament path | Aluminum heatsink, all-metal hotend |
| Drive system | Nextruder Planetary Gear System, 10:1 gearbox ratio |
| Cooling fan | High-performance turbine, 360° cooling system |
| Nozzle | High-flow Prusa Nozzle brass CHT - 0.4 mm |
| Max nozzle temperature | 290 °C / 554 °F |
| Max heatbed temperature | 120 °C / 248 °F |
| LCD screen | 3.5″ graphic 65k color screen |
| Connectivity | NFC receiver, optional ESP Wi-Fi module |
| Print medium | USB drive / LAN / internet via Prusa Connect |
| Advanced sensors | Filament sensor, Loadcell sensor, Power panic, 4 thermistors |
| Print surface | Magnetic heatbed with PEI spring steel sheets |
| Bed calibration | Automatic, Mesh Bed Leveling |
| Supported materials | PLA, PETG, Flex, PVA, PC, PP, CPE, PVB, ABS, ASA, HIPS, PA |
| PSU | 240W, custom made by Delta with Power Panic HW |
| Power consumption | PLA: 80W / ABS: 120W |
Reacties